Comtech EF Data CDD-562AL - Manual (Page 127)

CDD-562AL/564A/L Multi-Channel Demodulator Revision 0
Telnet and CLI Operation MN-CDD562AL564AL
9–25
9.2.2.4.2 ARP Table Utilities screen
Go to the ARP Table Utilities screen from the Protocol Configuration screen.
Use this screen to see and edit the ARP table defined by the demodulator. It allows up to 256 static
IPMAC ARP entries.
Entry001 through Entry008 (256), keystroke: 1 through 8
• The menu screen shows 8 ARP definitions at a time on the demodulator.
• User can define up to 256 ARP definitions.
• Define up to 256 static ARP definitions on the demodulator. A static ARP definition is:
o Unicast IP Address – This IP Address is used as a lookup into the ARP table when the
demodulator needs to resolve a MAC or HDLC Address.
o Restrictions:
 IP Address must be on the same subnet as the Ethernet Interface.
 IP Address must be a valid Unicast address (Not Multicast, broadcast, etc.)
 MAC Address – The MAC Address defines the hardware destination MAC
Address that is used when an Ethernet packet is destined for an IP machine from
the demodulator.
Delete ARP Entry, keystroke: D
• Deletes a Static ARP entry. Prompts for the IP address of the ARP entry to delete.