Comtech EF Data ODM-840 - Manual (Page 88)

ODM/R-840 Outdoor Remote Router Revision 0
Updating Firmware MN-ODM840
4–10
In the event you receive the “Connection closed by remote host.” message,
wait another minute before continuing. The ODM/R‐840 update sometimes
takes longer then the FTP client allows.
• Type "bye" to terminate the FTP session, and then close the Command‐line window.
3. Use the CLI or the ODM‐840 Web Server Interface ‘Admin | Firmware’ page to verify that
the PC‐to‐Unit FTP file transfer was successful.
4. Use the ODM‐840 Web Server Interface to select the firmware and reboot the unit:
A. Select the desired Boot Slot (Image):
• Go to the ODM‐840 Web Server Interface ‘Admin | Firmware’ page.
• Use the ‘Boot From:’ drop‐down menu
to select Latest, Slot 1, or Slot 2 (in the
Firmware Configuration section).
By default, the unit will boot from the Slot that stores the firmware version having
the latest date (Boot From: Latest). ‘Boot From:’ may also be set to force the unit to
boot up using either firmware image loaded in Slot #1 or Slot #2.
• Click [Submit] to save the setting.
B. Reboot the ODM/R‐840:
• Go to either the ODM‐840 Web Server Interface ‘Admin | Firmware’ page or the
‘Utility | Reboot’ page.
• Click [Reboot] (in the System Reboot
section) and [OK] when prompted, and
then wait while the ODM/R‐840 reboots.
The ODM/R‐840 is now operating with its latest firmware. The firmware update process is
now complete.