Comtech EF Data ODM-840 - Manual (Page 71)

ODM/R-840 Outdoor Remote Router Revision 0
Installation MN-ODM840
3–21
3.3.4.2 ODMR-840 Cabling
Figure 3‐14 summarizes the cabling requirements for an ODMR‐840 Standalone Installation.
KT-0020567 DC CABLE KIT
ITEM QTY CEFD PART NO. DESCRIPTION
1 1 CA-0020592
ODMR-840 TO ODMR-PS POWER CABLE, 10 SOCKET CIRCULAR TO
10 PIN CIRCULAR, SEALED, 6 FT
2 1 CA-0020696 POWER CABLE, DC POWER INPUT FROM USER TO ODMR-PS, 25 FT
3
1 CN-0020514
RJ-45 WEATHERPROOF THREADED COUPLING-STYLE CONNECTOR
(FOR USE WITH 8-PIN ETHERNET CABLE PROVIDED BY USER)
1 CN/HED87522-8002 RJ-45 8-PIN MALE CONNECTOR (PLUG)
USER-PROVIDED CABLING
ITEM QTY CABLE TYPE DESCRIPTION
4 2
ROHS-COMPLIANT COAX
CABLE WITH TYPE ‘N’
MALE CABLE ENDS
L-BAND RX AND TX SIGNAL CONNECTIONS
OPTIONAL UTILITY CABLING
ITEM QTY CEFD PART NO. DESCRIPTION
5 1 CA-0000722 RS-232 SERIAL COMMUNICATION CABLE
The optional Serial Communication Cable (CEFD P/N CA‐0000722) is intended for
configuration and testing of the unit prior to field installation.
Figure 3-14. ODMR-840 Cabling Connections
ODMR‐PS User Input ODMR‐PS to ODMR‐840 Interface
ODMR‐840 Chassis