Comtech EF Data ODM-840 - Manual (Page 92)

ODM/R-840 Outdoor Remote Router Revision 0
Ethernet-based Remote Product Management MN-ODM840
5–4
The user defines two Community Strings for SNMP access:
• Read Community
default = public
• Write Community
default = private
For proper SNMP operation, the ODM/R‐840 MIB files must be used with the
associated version of the ODM/R‐840 Outdoor Remote Router M&C. Refer to the
ODM/R‐840 FW Release Notes for information on the required FW/SW
compatibility.
5.4 Web Server (HTTP) Interface
A user‐supplied Web browser allows the full monitoring and control (M&C) of the ODM/R‐840
from its Web Server Interface. This embedded Web application is designed for, and works best
with, Microsoft Internet Explorer Version 7.0 or higher.
5.4.1 User Login
Type the ODM/R‐840 Management IP Address (shown here as http://xxx.xxx.xxx.xxx) into the
Address area of the user PC Web browser:
The login page opens.
Enter the assigned User Name and Password
– the default for both is comtech. Click [Log
On].
If the User Name and Password are
accepted: The ODM/R‐840 Outdoor Remote
Router Web Server Interface Home page,
similar to the example shown here, appears: