Comtech EF Data ODM-840 - Manual (Page 167)

ODM/R-840 Outdoor Remote Router Revision 0
Serial-based Remote Product Management MN-ODM840
6–11
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
Management
Link
Configuration
MLC= 1 byte, value 0 thru
5
Command or Query.
Management Interface mode, where:
0=Auto Negotiate
1=reserved
2=100Mbps – Full Duplex
3=100Mbps – Half Duplex
4=10Mbps – Full Duplex
5=10Mbps – Half Duplex
MLC =
MLC?
MLC *
MLC #
MLC ? MLC =x
(see Description of
Arguments)
Actual
Negotiated Port
Speed
N/A None Query only.
Returns actual negotiated port speed in the form ab, where:
a = GE 1 negotiated port speed.
b = the management port negotiated port speed.
a, b have the following values:
0 = Link down
1=100 Full
2=100 Half
3=10 Full
4=10 Half
5=1000 Full
N/A NPS? NPS=ab
(see Description of
Arguments)
Reported Es/No N/A 5 bytes Query Only.
Returns current Es/No of demodulator where:
s = ‘0’ or ‘-‘ (negative sign, if needed, zero otherwise)
xx.x = value between 00.0 to 35.0 dB.
Resolution = 0.1 dB.
Returns 999 if demod is unlocked.
Returns 35.0 for values greater than 35.0dB.
Note: This query provides a fast Es/No reading that is updated in the background
10 times per second, and is also averaged in the background over the previous 16
returned values.
N/A REN? REN=sxx.x
(see Description of
Arguments)
SNMP Read
Community SRC= 16 bytes,
characters, no
spaces
Command or Query.
SNMP read community string.
Example: <1/SRC=public
Note: Empty string is not allowed. SRC =
SRC! SRC?
SRC =x
(see Description of
Arguments)
SNMP
Write
Community
SWC= 16 bytes,
characters, no
spaces
Command or Query.
SNMP write community string.
Example: <1/SWC =public
Note: Empty string is not allowed. SWC =
SWC!
SWC? SWC =x
(see Description of
Arguments)