Comtech EF Data ODM-840 - Manual (Page 120)

ODM/R-840 Outdoor Remote Router Revision 0
Ethernet-based Remote Product Management MN-ODM840
5–32
• IP – Entry IP Address, in the form XXX.XXX.XXX.XXX.
• MAC – Entry MAC Address, in the form YY:YY:YY:YY:YY.
• Type (read‐only) – Entry Type is identifiable as Static or Dynamic and cannot be edited.
Make the desired IP and MAC Address edits. Click [Submit Changes] to save these settings.
5.4.4.3.5 Configuration | Routing Pages
Click the Routes, IGMP, or DHCP tab to continue.
5.4.4.3.5.1 Configuration | Routing | Routes
Use this page to enter static routes for IP traffic over the satellite or to another device on the
local LAN.
Figure 6‐16. Configuration | Routing | Routes page
Add New Route
Use this section to directly add a Route Table entry:
• Index (read‐only) – This is the internal table index that is automatically assigned and cannot
be edited.