Console configuration – Comtech EF Data ODM-840 User Manual
Page 5
Errata A for MN‐ODM840 Rev 0
Revise Sects. 2.2.3.1, 5.4.4.5.1, B.4
ER-ODM840-EA0
THIS DOCUMENT IS NOT SUBJECT TO REVISION/UPDATE! PLM CO C-0024248
Page 3 of 4
2. Replace Sect. 5.4.4.5.1 ‘Utility | Utility’ page, Console Configuration section
description (p. 5‐66):
Was:
Change to:
Console Configuration
At present, the only valid selection for the ‘CONSOLE/REDUNDANCY’ port’s
communications protocol is RS232‐8N1‐38400.
3. Revise Sect. B.4 ODM/R Rx/Tx Error Performance Characteristics:
a. Remove the sentence “QPSK 1/4, 1/3, 2/5 are shown for information only and are
not available in the ODM/R‐840.” from the “For Rx DVB‐S2 Operation:” paragraph
(p. B‐4)
‐and‐
b. Remove “(QPSK 1/4, 1/3, and 2/5 provided for reference only)” from the Figure
B‐2. DVB‐S2 QPSK Packet Error Rate versus Es/No caption (p. B‐5).