4 odm/r-840 specifications, 1 product specifications – Comtech EF Data ODM-840 User Manual
Page 36
ODM/R-840 Outdoor Remote Router
Revision 0
Introduction
MN-ODM840
1–10
1.4
ODM/R-840 Specifications
1.4.1
Product Specifications
Specification
Description
Data Interfaces
• 1X RJ-45 10/100/1000 BaseT Gigabit Ethernet
• 1X EIA-232 19-pin circular connector interface for serial remote control (ODM/R-840) and 1:1
Redundancy (ODM-840 only)
• 2X G.703 E1, 2.048 Mbps (BNC-F Unbalanced 75Ω) (ODM-840 only)
Dimensional Envelope
ODM-840: 9 W x 5.5 H x 16.75 D inches (227 W x 139 H x 422 D mm)
ODMR-840: 9 W x 2.8 H x 13 D inches (227 W x 71.1H x 330 D mm)
ODMR-PS: 4.8 W x 2.8 H x 7.5 D inches (122 W x 71.1 H x 190.5 D mm)
Weight
ODM-840: 22 lbs (9.98 kg)
ODMR-840: 10.3 lbs (4.67 kg)
ODMR-PS: 4.2 lbs (1.91 kg)
Power Supply
AC
ODM-840: 100V to 240V AC, 47-63 Hz without heater installed
110V with 110V heater installed
220V with 220V heater installed
DC
ODM-840: -48 VDC (HW option)
ODMR-840: -24 VDC or -48 VDC (via external ODMR-PS )
Temperature
Operating
32° to 131°F (0° to 55°C) (without Extended Temperature HW option)
-4° to 131°F (–20° to 55°C) Extended Temperature Version (HW option)
Storage
-40° to 158°F (–40° to 70°C)
Humidity
95% maximum, non-condensing
Vibration
Operating
• MIL-STD-810G, Three (3) axis exposure
• Method 514.6 Procedure
I
, Category 14, Rotary Wing Aircraft Profiles (modified)
Non-operating
• MIL-STD-810G, Three (3) axis exposure
• Method 514.6 Procedure
I
, Category 4, Composite Wheeled Profiles (modified)
Shock
Operating
• MIL-STD-810G, Three (3) axis exposure
• Method 516.6 Procedure
I
, 20G Maximum Pulse
Non-operating
• MIL-STD-810G, Three (3) axis exposure
• Method 516.6 Procedure
I
, 40G Maximum Pulse (modified)
Operating
Frequency
Tx
950 – 2150 MHz (L-Band)
Rx
Connectors &
Impedance
Tx
Type-N, 50
Ω
Rx
Transmit Power
0 to -40 dBm
BUC
(ODM-840
only)
Reference (10 MHz) 10.0 MHz ± 0.06 ppm, selectable ON/OFF, 0.0 dBm
± 3 dB
Power Supply
(HW Option)
• 24VDC, 3.75 Amps max., 90 W @ 50° C;
• 48VDC, 3.125 Amps max., 150W @ 50° C
LNB
Reference (10 MHz) 10.0 MHz ± 0.06 ppm, Selectable ON/OFF, -3.0 dBm ± 3 dB
Voltage
Selectable ON/OFF, 13V DC, 18V DC and 24V DC
Current
500 mA, maximum