Comtech EF Data ODM-840 - Manual (Page 112)

ODM/R-840 Outdoor Remote Router Revision 0
Ethernet-based Remote Product Management MN-ODM840
5–24
5.4.4.3.2 Configuration | Demod (Demodulator)
Use this page to configure ODM/R‐840 Rx demodulator operations.
Figure 6‐12. Configuration | Demod page
Demodulator
The upper range of Symbol Rate selection requires activation of the ‘RECEIVE
SYMBOL RATE’ FAST option.
The acceptable/valid operating range for each item in this section is provided in parentheses.
• Data Rate (read‐only) – This section displays the data rate, which is a snap shot of the
MODCOD currently being received.
• Symbol Rate (1000‐62000 ksps) – Enter the Active and Alternate symbol rates in ksps.
Click [Submit] to save these settings.
• Rx Frequency (950‐2150 MHz) – Enter the Active and Alternate Rx frequencies in MHz.