Basler Electric DGC-2020ES - Manual (Page 73)

9469200990 Rev C 65
Inputs
Contact Inputs
This screen indicates the status of contact inputs, contact input alarms, and contact input pre-alarms. The
status is TRUE when the corresponding indicator is red. See Figure 32.
The Contact Inputs screen is found in the BESTCOMSPlus Metering Explorer under the Inputs category.
If using the front panel, navigate to Metering > Alarms-Status > Inputs.
Figure 32. Metering Explorer, Inputs, Contact Inputs Screen
Remote Contact Inputs
When an optional CEM-2020 (Contact Expansion Module) is connected, the status of the remote contact
inputs, configurable remote contact input alarms, and remote contact input pre-alarms are shown on this
screen. The status is TRUE when the corresponding indicator is red. See Figure 33.
The Remote Contact Inputs screen is found in the BESTCOMSPlus Metering Explorer under the Inputs
category. If using the front panel, navigate to Metering > Alarms-Status > Inputs.
Figure 33. Metering Explorer, Inputs, Remote Contact Inputs Screen
Logic Control Relays
This screen indicates the status of logic control relays. The status is TRUE when the corresponding
indicator is green. See Figure 34.
The Logic Control Relays screen is found in the BESTCOMSPlus Metering Explorer under the Inputs
category. If using the front panel, navigate to Metering > Alarms-Status > Logic Control Relays.
DGC-2020ES Metering