Basler Electric DGC-2020ES - Manual (Page 248)

240 9469200990 Rev C
Firmware
Version and Date
Change
•
Added logic point for DPF Lamp Status from Diesel Particulate
Filter Control 1 PGN
•
Changed to prevent Oil Pressure Crank Disconnect from operating
if there is a valid RPM Source
•
Removed the letter "DPF" from DPF Regenerate Required and
DPF Regeneration Inhibited Strings
•
Added Selective Catalytic Reduction Parameters to the list of
strings displayed for SPN's in Diagnostic Trouble Codes
•
Modified front panel so that if MTU Fault Codes are in effect while
an alarm or pre-alarm is in effect, the DGC-2020ES will alternate
between the Alarm or Pre-alarm display and the MTU Fault Code
display
•
Added a Mains Fail Transfer Status screen on the front panel
•
Changed to prevent unit from starting the machine when Battle
Override is engaged after an alarm occurs, but the OFF button has
never been pressed to clear the alarm, if the DGC pulses while in
the alarm state, at the end of the pulse cycle
•
Generator Status string now displays Alarm if Battle Override is
applied after an alarm shutdown
1.01.01, Apr-14 •
Made the J1939 data menu available through the HMI when the
unit is configured for Scania ECU type
1.02.00, Oct-14 •
Added MTU Speed Demand Switch setting from logic capability
•
Added a rest timer for cyclic cranking
•
Added Mains Fail Return Fail pre-alarm and Mains Fail Max
Return Time setting
•
Added John Deere to list of ECU configurations
•
Changed DEF EMPTY pre-alarm to DEF LOW SEVERE
•
Changed DEF ENGINE DERATE pre-alarm to DEF
INDUCEMENT
•
Added descriptive text for Diagnostic Trouble Codes (DTC’s)
broadcast by Mercedes, PSI, and MTU-ECU9 engine ECU’s
•
Added ECU9 Fault Code list for MTU
Table 40. Software Revision History
Software
Version and Date
Change
3.03.00, Mar-13 •
Initial Release
3.03.03, Jun-13 •
Maintenance release (BE1-11 changes)
3.04.00, Aug-13 •
Maintenance release (BE1-11 changes)
3.04.01, Oct-13 •
Maintenance release (BE1-11 changes)
3.05.02, Jan-14
•
Maintenance release (DGC-2020 changes)
3.05.03, Mar-14 •
Maintenance release (DECS-250N changes)
3.06.00, Apr-14 •
Maintenance release (BE1-11 changes)
Revision History DGC-2020ES