Basler Electric DGC-2020ES User Manual
Page 245
9469200990 Rev C
237
FMI
String Displayed
Description
16
DATA HI MODERATE SVR
Data is higher than expected at a moderately severe level
17
DATA LO LST SEVERE
Data is lower than expected at the least severe level
18
DATA LO MODERATE SVR
Data is lower than expected at a moderately severe level
19
NETWORK DATA ERR
String Indicating Network Data contained an error indication
20
DATA DRIFTED HI
Data has drifted to a value higher than the maximum valid value.
21
DATA DRIFTED LO
Data has drifted to a value lower than the minimum valid value.
22
FMI RESERVED BY SAE
This FMI is reserved by the Society of Automotive Engineers.
23
FMI RESERVED BY SAE
This FMI is reserved by the Society of Automotive Engineers.
24
FMI RESERVED BY SAE
This FMI is reserved by the Society of Automotive Engineers.
25
FMI RESERVED BY SAE
This FMI is reserved by the Society of Automotive Engineers.
26
FMI RESERVED BY SAE
This FMI is reserved by the Society of Automotive Engineers.
27
FMI RESERVED BY SAE
This FMI is reserved by the Society of Automotive Engineers.
28
FMI RESERVED BY SAE
This FMI is reserved by the Society of Automotive Engineers.
29
FMI RESERVED BY SAE
This FMI is reserved by the Society of Automotive Engineers.
30
FMI RESERVED BY SAE
This FMI is reserved by the Society of Automotive Engineers.
31
CONDTN EXST OR FMI NA
If the SPN refers to a parameter with status of ON or OFF, an FMI of 31
indicates ON. If the SPN refers to a parameter with a numeric value, an
FMI of 31 indicates that there is no FMI to describe the parameter’s
condition.
DGC-2020ES
Diagnostic Trouble Codes