Mtu fault codes – Basler Electric DGC-2020ES User Manual
Page 205
![background image](https://www.manualsdir.com/files/773946/content/doc205.png)
9469200990 Rev C
197
MTU Fault Codes
A DGC-2020ES connected to a genset equipped with an MTU engine ECU tracks and displays the active
fault codes issued by the MTU engine ECU. Active MTU fault codes can be viewed through
BESTCOMSPlus
® by using the Metering Explorer to expand the MTU tree or through the front panel
display by navigating to METERING > ALARMS-STATUS > MTU FAULT CODES.
Each fault code is displayed with a fault description and the fault number. If the DGC-2020ES does not
have descriptive information about a fault number that was received, the fault description will display
as “NO TEXT AVAILABLE”. Fault codes displayed by the DGC-2020ES are listed in Table 34.
Table 34. MTU Fault Codes
Fault
Code
Number
String
Description
3
HI T FUEL
Fuel temperature too high (limit 1).
4
SS T FUEL
Fuel temperature too high (limit 2).
5
HI T CHRG AIR
Charge air temperature too high (limit 1).
6
SS T CHRG AIR
Air temperature too high (limit 2).
9
HI T INTERCOOLER
Coolant temperature of InterCooler too high (limit 1).
10
SS T INTERCOOLER
Coolant temperature of InterCooler too high (limit 2)
15
LO P LUBE OIL
Pressure of lube oil too low (limit 1).
16
SS P LUBE OIL
Pressure of lube oil too low (limit 2).
19
HI T EXHAUST A
Exhaust gas temperature (A-side) too high (limit 1).
20
SS T EXHAUST A
Exhaust gas temperature (A-side) too high (limit 2).
21
HIT T EXHAUST B
Exhaust gas temperature (B-side) too high (limit 1).
22
SS T EXHAUST B
Exhaust gas temperature (B-side) too high (limit 2).
23
LO COOLANT LEVEL
Coolant level too low (limit 1).
24
SS COOLANT LEVEL
Coolant level too low (limit 2).
25
HI P DIFF LUBE OIL
Differential pressure of oil filter too high (limit 1).
26
SS P DIFF LUBE OIL
Differential pressure of oil filter too high (limit 2).
27
HI LEVEL LEAKAGE FUEL
Level of leakage fuel too high (limit 1).
29
HI ETC IDLE SPD TOO HI
Idle speed of one of the switchable chargers too high.
30
SS ENGINE OVERSPEED
Engine overspeed (limit 2).
31
HI ETC1 OVERSPEED
Speed of basic charger too high (limit 1).
32
SS ETC1 OVERSPEED
Speed of basic charger too high (limit 2).
33
L1 P FUELFLT DIF
Differential pressure of fuel filter too high (limit 1).
36
HI ETC2 OVERSPEED
Speed of 1
st
switchable charger too high (limit 1).
37
SS ETC2 OVERSPEED
Speed of 1
st
switchable charger too high (limit 2).
38
AL ETC SPEED DEVIATION
Speed deviation between basic turbo charger and one of the switchable
chargers.
39
AL ETC2 CUTIN FAIL
Switching of charger ETC2 failed.
44
LO LEVEL INTRCLR
Coolant level of intercooler too low (limit 1).
45
FAULT L2 LEVEL INTRCLR
Coolant level of intercooler too low (limit 2).
51
HI T LUBE OIL
Lube oil temperature too high (limit 1).
52
SS T LUBE OIL
Lube oil temperature too high (limit 2).
53
HI T INTAKE AIR
Air intake temperature high (Limit 1).
54
HIHI T INTAKE AIR
Air intake temperature high (Limit 2).
57
LO P COOLANT
Coolant pressure too low (limit 1).
58
SS P COOLANT
Coolant pressure too low (limit 2).
59
SS T COOLANT L3
Coolant temperature too high/too low (limit 3).
DGC-2020ES
MTU Fault Codes