Basler Electric DGC-2020ES - Manual (Page 20)

12 9469200990 Rev C
○ LOW COOL LEVEL (Visible when the Low Coolant Level programmable function is configured to be
driven by an input.)
○ LOW FUEL LEVEL (Visible when the Low Coolant Level programmable function is configured to be
driven by an input.)
○ BATT CHRG FAIL (Visible when the Battery Charger Fail programmable function is configured to be
driven by an input.)
○ FUEL LEAK DETECT (Visible when the Fuel Leak Detect programmable function is configured to be
driven by an input.)
○ GRND DELTA O-RIDE (Visible when Generator Connection is configured for Delta and the Grounded
Delta Override programmable function is configured to be driven by an input.)
○ 1 PHASE O-RIDE (Visible when the 1-Phase Override programmable function is configured to be driven
by an input.)
○ BUS DEAD
○ BUS STABLE
○ BUS FAILED
○ GEN DEAD
○ GEN STABLE
○ GEN FAILED
○ ENG RUNNING
○ CLDN TMR ACTVE
○ OFF MODE COOLDN
○ COOLDN REQ
○ COOL & STOP REQ
○ EXT START DEL
○ START DEL BYPASS
○ ALT FRQ O-RIDE
○ RESET
○ ALARM SILENCE
○ LAMP TEST
○ IDLE REQUEST
○ MAINS FAIL TEST
○ CEM CONNECTED
● INPUTS
○ INPUT X (X = 1 to 7 (8 to 17 optional))
● OUTPUTS
○ START
○ RUN
○ PRESTART
○ OUTPUT X (X = 1 to 4 (5 to 28 optional))
● LOGIC CTL RELAYS
○ LCR X (X = 1 to 16)
● CONF ELEMENTS
○ CONFIG ELEMENT X (X = 1 to 8)
● EVENT LOG
○ [EVENT NAME]
■ ACTIVE
■ OCCURRENCE COUNT
■ FIRST DATE
■ FIRST TIME
■ LAST DATE
■ LAST TIME
■ FIRST ENG HRS
■ LAST ENG HRS
■ DETAILS
□ OCCURRENCE (Use the Edit/Up/Down keys to change the occurrence.)
□ DATE
□ TIME
□ ENG HRS
■ CLEAR EVENT (Visible when logged in through the front panel.)
● J1939 DATA (Visible when CAN bus is enabled and ECU is configured for Standard, Volvo Penta, MTU ADEC,
GM/Doosan, Cummins, MTU Smart Connect, Scania, or John Deere.)
○ THROTTLE POSITN
○ LOAD @ CRNT RPM
○ ACTUAL ENG TORQ
○ ENGINE SPEED
Controls and Indicators DGC-2020ES