Basler Electric DGC-2020ES - Manual (Page 27)

9469200990 Rev C 19
○ HIGH FUEL LEVEL
■ ENABLE
■ THRESHOLD
■ ACTIVATN DLY
○ ACTIVE DTC (Visible when DTC is enabled.)
■ ENABLE
○ ECU COMMS FAIL (Visible when CAN BUS is enabled.)
■ ENABLE
○ COOLANT LEVEL (Visible when CAN BUS is enabled.)
■ ENABLE
■ THRESHOLD
○ CEM COMM FAIL (Visible when CEM-2020 is enabled.)
■ ENABLE
○ CHECKSUM FAIL
■ ENABLE
○ BRK CLOSE FAIL PALM
■ ENABLE
○ BRK OPEN FAIL PALM
■ ENABLE
•
ALARMS
○ HIGH COOLANT TEMP
■ ENABLE
■ THRESHOLD
■ ARMING DELAY
○ LOW OIL PRESSURE
■ ENABLE
■ THRESHOLD
■ ARMING DELAY
○ LOW FUEL LEVEL
■ ENABLE
■ THRESHOLD
■ ACTIVATN DLY
○ OVERSPEED
■ ENABLE
■ THRESHOLD
■ ACTIVATN DLY
○ COOLANT LEVEL (Visible when CAN bus is enabled.)
■ ENABLE
■ THRESHOLD
Note
The HIGH COOLANT TEMP and LOW OIL PRESSURE alarms have
an ARMING DLY setting that disables the alarm for the specified time
after engine startup.
● SENDER FAIL
○ COOL TEMP SENDR FAIL
■ CONFIG TYPE
■ ACTIVATN DLY
○ OIL PRESS SENDR FAIL
■ CONFIG TYPE
■ ACTIVATN DLY
○ FUEL LEVL SENDR FAIL
■ CONFIG TYPE
■ ACTIVATN DLY
○ VOLTAGE SENSE FAIL
■ CONFIG TYPE
■ ACTIVATN DLY
○ SPEED SENDR FAIL
■ TIME DELAY
DGC-2020ES Controls and Indicators