Axel AX3000 65 User's Manual - Manual (Page 88)

Installing under UNIX/LINUX
76
AX3000 - User's Manual
a) Connection Properties
Within the 'Session Profile' box, select 'Connection Properties' and press
. The following box is displayed:
These parameters are:
- Auto-Connection: if this parameter is set to 'yes', the connection will be
automatically established when the AX3000 is powered. Otherwise, the
user can press to establish the connection.
- Auto-Reconnection: if this parameter is set to 'yes', a new connection is
automatically established after a disconnection. Otherwise, the user can
press to establish a new connection.
- Session Label: this character string (10 characters max.) is used to
identify the session on the AX3000 TCP/IP status line or when no session
is connected (see Chapter 4.1 - 'idle screen' explanation).
- Enhanced parameters: see Appendix A.9.3.