Axel AX3000 65 User's Manual - Manual (Page 48)

Interactive Set-Up
36
AX3000 - User's Manual
- Speed: selected from a list (from 300 to 115,200 bits per second).
- Format: data format is selected from a list: data length (7 or 8 bits), stop
bit and parity (none, odd or even).
- Test Device Presence: the CTS signal can be used by the AX3000 to
detect the peripheral’s presence.
- Handshake for Transmission: handshake used by the peripheral to
control the AX3000’s data flow.
- Handshake for Reception (available only in bi-directional mode):
handshake used by the AX3000 to control the peripheral’s data flow.
- Service: see Chapter 3.5.2 and following.
- Parameters: see Chapter 3.5.2 and below
b) Setting the Parallel Port
Select the [Configuration]-[Ports]-[Auxiliary Ports]-[Parallel] dialog box to
configure the parallel port:
No specific settings are required for the parallel port.
For selecting and setting up and network service, see Chapter 3.5.2 and below.