Axel AX3000 65 User's Manual - Manual (Page 45)

Interactive Set-Up
AX3000 - User's Manual
33
Logical Port').
b) Setting-Up
The USB printer set-up procedure is the same as a serial or parallel printer.
For more information, see Chapter 3.5.2 and the following.
c) Releasing a Logical Port
A logical port must be manually released. This operation can be performed only
when the USB device is no longer connected.
In the menu [Configuration]-[Ports]-[USB Logical Ports] select the logical
port and press . The following box is displayed:
Select the [DELETE] button to release the logical port.
The released logical port is removed from the list of the associated ports and is
now available for the next USB device.
3.4.7 - Listing Connected USB devices
To list all connected USB devices (supported or not) select the menu
[Diagnostic]-[USB].
Use the arrows within the displayed list to select a device and press for
more information. A dialog box is displayed with more information – or a beep is
sounded if the device is not supported by the terminal.