Axel AX3000 65 User's Manual User Manual
Page 207
Remote
Set-Up
AX3000 - User's Manual
195
Solution:
check the number of sessions and pages.
ERR 214: Associate host not found. Association reset.
Command:
setup_send
Cause:
a session is associated with a non existing host.
Consequence: to get a consistent configuration, this session is not
associated with a host.
Solution:
check the host configuration.
ERR 215: s%_udk_xxx and following: no place to store udk value.
Command:
setup_send
Cause:
not enough memory to store a group of programmable keys.
Consequence: the default values of these keys are restored.
ERR 216: Too many RDP sessions. Only the first one is available.
Command:
setup_send
Cause:
more than one RDP session are set (only one is allowed).
Consequence: only the first RDP session is kept.
Solution:
remove the extra RDP sessions.
ERR 218: Telnet service and default port conflict.
Command:
setup_send
Cause:
the telnet set-up TCP port is in conflict with another service.
Consequence: the telnet set-up doesn't work properly.
Solution:
the conflict must be fixed.
ERR 219: ASCIItoEBCDIC: only on default port.
Command:
setup_send
Cause:
The ASCII to EBCDIC operating mode is not associate with
the default port.
Consequence: the auxiliary port doesn't work properly.
Solution:
change the default auxiliary port.