Axel AX3000 65 User's Manual User Manual
Page 200
Remote Set-Up
188
AX3000 - User's Manual
This chapter covers remote set-up of the TCP/IP AX3000.
10.1 - TELNET INTERACTIVE SET-UP
The AX3000 interactive set-up can be accessed through a telnet session. A
specific TCP port is used.
The default value of this TCP port is 4096. This value can be changed. (Select
[Configuration]-[Advanced]-[Tunings] and set "telnet set-up tcp port").
Any telnet client can open a set-up session to the AX3000. The prerequisite of
the telnet client is:
- ANSI emulation (with color support)
- TERM value: ansi
- Screen size: 80x25
- scrolling mode disabled
☺
: a Windows administration utility (AxRM or Axel Remote Management) is
available free on the Axel Web site. An embedded telnet client is provided. See
Chapter 8.8.
Notes:
- To disable the telnet set-up, set the TCP port to 0.
- When the telnet set-up is running, the set-up is also displayed on the
target terminal. The keyboard of the target terminal is locked.
- The AX3000 server telnet supports the keepalive mechanism (value 3
minutes). In event of network incident, the set-up will be automatically
ended and the keyboard of the target terminal will be unlocked.