Axel AX3000 65 User's Manual - Manual (Page 106)

Installing under UNIX/LINUX
94
AX3000 - User's Manual
For more information about this command, refer to Chapter 10.
5.5.5 - Downloading Firmware
To download an AX3000 firmware through TFTP:
# rsh axname ax_download password /axfirm/axel 192.168.1.2 192.168.1.1
To download an AX3000 firmware through BOOTP and TFTP:
# rsh axname ax_download password
Where:
- axname : AX3000 name (/etc/hosts) or IP address,
- ax_download : command for firmware downloading,
- password
: specify the set-up password if set.
- /axfirm/axel : path and name of the firmware file,
- 192.168.1.2 : TFTP Server IP address,
- 192.168.1.1 : optional router IP address.
Messages are displayed on the target AX3000 (See Chapter 11.4).
5.5.6 - Viewing AX3000 Statistics
Some AX3000 statistics can be obtained by invoking the following command:
# rsh axname ax_getstat
Where:
- axname : AX3000 name (/etc/hosts) or IP address,
- ax_getstat : command for getting statistics.