Axel AX3000 65 User's Manual - Manual (Page 55)

Interactive Set-Up
AX3000 - User's Manual
43
- Pre-print String: character string sent before the printing.
- Post-print String: character string sent after an the printing (for
example "\0C" is a form feed)
b) Using the rsh Command to Print
The embedded rcmd service allows files to be printed through the rsh command
(or rcmd command, according to the operating system used).
To set the rcmd service on the required auxiliary port, select the rcmd service
from the [Configuration]-[Ports]-[xxx]-[yyy] dialog box. Then enter the name
of the associated printer port.
For more information about the rsh command, refer to Chapter 5.3.3.
c) Using printd Legacy Service
The printd service has been used in the past, under the UNIX axconf utility, to
control printers. To maintain backward compatibility it's still available, but the lpd
and tty services should always be used in preference.
3.6 - MULTI-SESSION AND STATUS LINE
The multi-session dialog box controls the following AX3000 parameters:
- the maximum number of sessions (i.e. simultaneous connections),
- special hot keys to flip between sessions,
- the TCP/IP status line.