Axel AX3000 65 User's Manual User Manual
Page 44
Interactive Set-Up
32
AX3000 - User's Manual
barcode reader is treated as a keyboard. See previous chapter.
3.4.4 - Connecting a Mouse
A USB mouse is automatically detected by the Axel terminal. No specific
settings are required.
Note: multiple mice (USB and/or PS2) can be used simultaneously.
3.4.5 - Connecting a HUB
A USB HUB is automatically detected by the Axel terminal. No specific settings
are required.
3.4.6 - Connecting a Printer
a) Logical Port Attachment
When a USB printer is connected for the first time to the Axel terminal a logical
port is associated. Four logical ports are available: Usb1, Usb2, Usb3 and
Usb4.
The associated logical ports are listed in the menu [Configuration]-[Ports]-
[USB Logical Ports]. To get information of a USB printer, select its logical port
and press
This association is maintained even if the printer is powered off, disconnected
or connected to the other USB port.
Releasing a logical port is a manual operation (see Chapter below 'Releasing a