Axel AX3000 65 User's Manual - Manual (Page 82)

Installing under UNIX/LINUX
70
AX3000 - User's Manual
These parameters are:
- TERM Value (telnet and ssh protocols). The value of this environment
variable is 'negotiated', between the host and the AX3000. The following
table shows the default values according to the emulations:
Emulation TERM Emulation TERM
ANSI ansi XENIX SCO ansi
SCO OPENSERVER ansi ANSI DATA GENERAL ansi
UNIX SVR4 AT386 ANSI INTERACTIVE AT386
ANSI RS6000 hft-c-old ATO300 vt220
UNIXWARE 7 AT386-ie PRISM prism
LINUX linux REAL/32 ---
VT100/VT220 vt220 THEOS CLASS185
VT52 Vt52 OS2 POLYMOD2 CLASS185
WYSE 60 wyse 60 SM94xx in9400-uv
ADDS VP-A2 Enhanced viewpoint TWIN SERVER twin server
ADDS VP-60 viewpoint60 PROLOGUE 3 prl3
3151 ibm3151 TVI 950 tvi950
ANSI DOS ansi QVT119+ qvt119+
UNIX SCO 3.2.2 ansi C332 C332
UNIX SCO 3.2.4 ansi
- Auto-Connection: if this parameter is set to 'yes', the connection will be
automatically established when the AX3000 is powered. Otherwise, the
user can press to establish the connection.
- Auto-Reconnection: if this parameter is set to 'yes', a new connection is
automatically established after a disconnection. Otherwise, the user can
press to establish a new connection.
- Session Label: this character string (10 characters max.) is used to
identify the session on the AX3000 TCP/IP status line or when no session
is connected (see Chapter 4.1 - 'idle screen' explanation).
- Login Script: a "login script" can be set to automatically enter user
names and passwords at the login prompt. See Chapter 5.1.8.
- Enhanced parameters: see Appendix A.9.3.
5.1.8 - Login Script
The "login script" can be set to automatically enter user names and passwords
at the login prompt.