Axel AX3000 65 User's Manual - Manual (Page 245)

Appendix
AX3000 - User's Manual
233
aux%_associate_envelope=*NONE (character string, 10 char max.)
aux%_associate_ascii899=no
(yes | no)
aux%_associate_wscstname= (character string, 8 char max.)
aux%_associate_wscstlib= (character string, 8 char max.)
aux%_associate_transp= (yes | yes-hexa)
aux%_associate_transp-seq= (character string, 4 char max.)
aux%_tcp_window=1024 (number)
aux%_tcp__mss=512 (number)
aux%_tcp__ttl=64 (number)
aux%_tcp__setport=random
(ramdom | fixed)
aux%_tcp__nagle=disable (disable | enable)
aux%_tcp__keepalive=no (yes | no)
aux%_tcp__keepaliveval=120 (number)
aux%_use=bi-directional
(printer | bi-directional | RDP
redirection)
aux%_speed=38400 (300 | 600 | 1200 | 2400 | 4800
9600 | 19200 | 38400 | 57600
115200)
aux%_data (7-1-none | 7-1-odd | 7-1-even
8-1-none | 8-1-odd | 8-1-even)
aux%_tx_hdsk=dtr (none | xon-xoff | xpc | dtr)
aux%_rx_hdsk=dtr (none | xon-xoff | xpc | dtr)
aux%_detect=none (none | cts)
aux%_tx_fifo=yes (yes | no)
b) Parallel Port
parallel_service=none (none | rtty | printd | lpd | rcmd
Prt5250 | tty)
parallel_service_name=parallel (character string, 8 char max.)
parallel_associate_host=vangogh (character string, 64 char max.)
parallel_associate_term=ansi
(character string, 8 char max.)
parallel_associate_autoconn=yes (yes | no)
parallel_associate_reconn=yes (yes | no)
parallel_service_tcpport=2050 (number)
parallel_rtty_accept=no
(yes | no)
parallel_filter_nl=no (yes | no)
parallel_preprint_string= (character string, 48 char max.)
parallel_postprint_string= (character string, 48 char max.)