Axel AX3000 65 User's Manual - Manual (Page 49)

Interactive Set-Up
AX3000 - User's Manual
37
c) Setting USB Logical Ports
Select the [Configuration]-[Ports]-[USB Logical Ports]-[UsbX] dialog box to
configure a USB logical port:
No specific settings are required for a USB logical port.
For selecting and setting up and network service, see Chapter 3.5.2 and below.
d) Setting TCP Logical Ports
Select the [Configuration]-[Ports]-[TCP Logical Ports]-[NetX] dialog box to
configure a TCP logical port:
The following parameters can be set:
- Connection Type: always 'raw'
- Server: press to select the server from a list.
- TCP Port: numeric identifier of the connection. The default value is 2048.
- Inactivity Time-out (sec): the session is automatically disconnected
after this inactivity delay.