Axel AX3000 65 User's Manual - Manual (Page 148)

Installing under Windows
136
AX3000 - User's Manual
This chapter covers AX3000 installation under Windows
This chapter describes the operation of the AX3000 in a Windows environment.
For more general information about the AX3000 (network and session settings,
instructions for users, etc) please refer to the previous chapters.
The connection to a Windows server can be done either via:
- Microsoft's RDP protocol (Remote Desktop Protocol)
- Citrix's ICA protocol (Independent Computing Architecture)
These two protocols enable a remote graphical display on the AX3000. The
image is constructed, maintained and updated within the Windows server (NT4
TSE, 2000 Server and 2003 Server).
The AX3000 allows up to six concurrent and independent sessions but only two
can be set-up for RDP or ICA. .
8.1 - RDP SCREEN SESSION
The embedded protocol is RDP5. The following table shows key features
available for each operating system:
Number of
bits/pixel
Printer
Redirection
COM Port
Redirection
NT4-TSE 8 bpp (256 colours) No No
Windows 2000 8 bpp (256 colours) Yes Yes
Windows 2003
15 bpp (32768 colours)
16 bpp (65536 colours)
Yes Yes