Axel AX3000 65 User's Manual - Manual (Page 151)

Installing under Windows
AX3000 - User's Manual
139
These parameters are:
- Encryption: three values of encryption are available. (For more
information see Chapter 8.4.1):
- No: only non-encrypted connections are accepted.
- Low Level: only one-direction encrypted connections are accepted.
(Data sent by Windows is encrypted).
- Medium Level: both-direction and one-direction encrypted
connections are accepted.
- High Level: only both-direction encrypted connections are
accepted.
- Connection Name: this character string identifies the AX3000 within the
Windows Operating System. By default this name is the terminal name
(see Chapter 3.1.1).
- Note: This is not the identifier used by Windows for licensing control. The
licensing identifier cannot be changed.
- Mouse Accelerator: if 'yes', the AX3000 speeds up the mouse cursor.
- Timezone GMT: the time zone can be negotiated by the terminal when
the RDP session is established. This allows an independent local time to
be used. This time zone redirection function must be enabled at the
Windows 2003 server level. See Chapter 8.4.6.
- Server Remote Control: when set to 'yes', the RDP connection will take
remote control of the Windows Server main console.
- Daylight Saving: enabling the clock for daylight saving.
- : the two modes for this keystroke are:
- local: the keystroke is handled by the AX3000 and is used for
shutdown the terminal (see Chapter 4.5)
- remote: the keystroke is handled by the Windows server (for
example opening the task manager).
- & : enable or disable these two keys