Axel AX3000 65 User's Manual - Manual (Page 217)

Downloading Firmware
AX3000 - User's Manual
205
Note about password: specify the password if the set-up is password-
protected. The message 'Downloading in progress...' will be displayed
on the operator’s console if downloading can be performed (AX3000 and tftp
host reachable, firmware file found, etc).
Note: error messages can also be displayed (connection timed-out for
example). For explanations refer to UNIX manuals.
For more information about the download process, see Chapter 11.4
11.3.2 - Downloading Through Set-Up
Enter AX3000 Set-Up () and select the [Download] menu.
Set the Protocol parameter to bootp. When the [OK] button is selected, the
download operation begins.
For more information about the download process, see Chapter 11.4.
11.4 - THE DOWNLOAD PROCESS
During the download operation, the following messages are displayed on the
AX3000 monitor.
11.4.1 - The bootp Stage
AX BOOTP V1.1a
Flash Key 3
If a response is received to the bootp broadcast request, information about the
firmware file location will be displayed:
AX3000 IP: 192.168.1.242
bootp server name: vangogh
bootp relay IP: 0.0.0.0
tftp server IP: 192.1.1.254
file name: /axel/firm
tftp router IP: 192.168.1.252