Axel AX3000 65 User's Manual - Manual (Page 246)

Appendix
234
AX3000 - User's Manual
parallel_associate_devname= (character string, 10 char max.)
parallel_associate_msgqname= (character string, 10 char max.)
parallel_associate_msgqlib= (character string, 10 char max.)
parallel_associate_font=11 (character string, 10 char max.)
parallel_associate_mfrtypmdl= (character string, 10 char max.)
parallel_associate_pprsrc1=
(character string, 10 char max.)
parallel_associate_pprsrc2= (character string, 10 char max.)
parallel_associate_envelope= (character string, 10 char max.)
parallel_associate_ascii899=no (yes | no)
parallel_associate_wscstname= (character string, 8 char max.)
parallel_associate_wscstlib=
(character string, 8 char max.)
parallel_associate_transp= (yes | yes-hexa)
parallel_associate_transp-seq= (character string, 4 char max.)
parallel_tcp_window=1024 (number)
parallel_tcp_mss=512 (number)
parallel_tcp_ttl=64 (number)
parallel_tcp_setport=random
(ramdom | fixed)
parallel_tcp_nagle=disable (disable | enable)
parallel_tcp_keepalive=no (yes | no)
parallel_tcp_keepaliveval=120 (number)
parallel_operating_mode= (optimised
|standard)
parallel_sup_signals= (none | select | paper | both)
c) USB Logical Ports
In the following section of the file, for ease of reading the USB logical port
number (1 to 4) has been represented by the '%' character. In a real
configuration file, the parameters for each port would, of course, be listed.
usb%_service=none (none | rtty | printd | lpd | rcmd
Prt5250 | tty)
usb%_service_name=Usb% (character string, 8 char max.)
usb%_associate_host=vangogh (character string, 64 char max.)
usb%_associate_term=ansi (character string, 8 char max.)
usb%_associate_autoconn=yes (yes | no)
usb%_associate_reconn=yes (yes | no)
usb%_service_tcpport=2050 (number)
usb%_rtty_accept=no
(yes | no)
usb%_filter_nl=no (yes | no)