beautypg.com

AMETEK SFA Series Ethernet Programming User Manual

Page 86

background image

SCPI Command Operation

SG Series Programming

6-14

M550129-03 Rev K

Command

Description

SCPI

:RAMP

Sets the output current to ramp from the present value to the
specified value (first argument) in the specified time (second
argument). See Ramp Function description below.

N

:RAMP?

Returns 1 if the ramp is in progress, and 0 if the ramp is
completed.

N

:ABORt

Aborts ramping and clears trigger mode.

N

:ALL?

Returns the ramping status of all channels.

N

:HTRIGgered

Sets the value of the output current to ramp to be
implemented when the hardware trigger is received.

N

:HTRIGgered?

Returns the value of the output current to ramp to be
implemented when the hardware trigger is received.

N

:TRIGgered

Sets the output current to ramp from the present value to
the specified value (first argument) in the specified time
(second argument) upon the trigger command. See Ramp
description below.

C

:TRIGgered?

Returns the value that the output current is to ramp to (first
value) and the time that it is to ramp (second value) upon
the trigger command.

C

:TRIGgered

Sets the output voltage to the values stored by the
SOURce: CURRent:TRIGger:AMPLitude command.

C

:TRIGgered?

Returns the current level that will be set upon receipt of the
trigger.

C

:CLEar

Clears the value stored by the
SOURce:CURRent:TRIGger:AMPLitude command.

C

:AMPLitude

Stores the value of the output current to be set when the
SOURce: CURRent:TRIGGered command is sent.

C

:AMPLitude?

Returns the stored value of the output current to be set
when the SOURce: CURRent:TRIGGered command is
sent.

C

:POWer

(in SGI only); see Section 6.13.2.

C

:POWer?

C

:TIMeout?

Returns the integer value 1 (timeout since last query) or 0
(no timeout) of the timeout status of the channel.

N

:VOLTage

Sets the output voltage of the supply in volts (default) or in
millivolts.

C

:VOLTage?

Returns the output voltage of the supply in volts or in
millivolts.

C

[:LEVel]

Sets the output voltage of the supply in volts (default) or in
millivolts.

C

[:LEVel?]

Returns the output voltage of the supply in volts or in
millivolts.

C