AMETEK SFA Series Ethernet Programming - Manual (Page 72)

Ethernet Configuration and Remote Programming SG Series Programming
5-32 M550129-03 Rev K
EDIT EXISTING USER
Accessible from the Security Page by clicking the EDIT button after first
selecting the user’s name, this page allows you (a Full permissions user)
to edit the parameters for an existing user.
Figure 5-21. Edit Existing User Window from Security Page
When this page appears, the fields are populated with the selected user’s
existing parameters.
To edit: 1. Input appropriate information, as desired, in User ID
(case-sensitive, limited to 14 characters), in Password
(case sensitive, limited to 9 characters), and/or in Re-
enter Password fields.
2. Select permission level from the Permission dropdown.
3. To accept into the system, click SUBMIT or tap the
ENTER key.
If your edit was successful, you will return to the Security page with a
message to that effect.
If there is an error in the editing process, you will stay in the Edit Existing
User page, and you will see a message in the EDIT EXISTING USER:
line, describing the reason for the error.
•
RESET: click to clear the fields where you input information.
•
CANCEL: click to return to the Security page; a message displays
verifying that the User Edit was cancelled. This button does NOT
“undo” previous successfully submitted operations.