AMETEK SFA Series Ethernet Programming - Manual (Page 57)

SG Series Programming Ethernet Configuration and Remote Programming
M550129-03 Rev K 5-17
•
IP Address: your power supply’s address actually in use at start-
up; can be statically configured, DHCP acquired (default), or Auto-
IP assigned (see description for
CONFIGURATION page)
•
Subnet Mask: network segment your power supply is on
•
Gateway: IP address through which the instrument communicates
with systems that are not on the local subnet
•
DNS Server: IP address of the Domain Name System (DNS)
server
•
Listening Port: port number for the embedded Web server
5.5.2 IP CONFIGURATION
Only users with FULL permissions shall have access to this Web page and
be allowed to configure the interface. You are only required to complete the
information for the parameters that you wish to change; all previously entered
and saved information remains by default.
Figure 5-13. SGI IP Configuration Page
Host Name: the default name includes the base model number of your
power supply, with the last four digits of the serial number. You may
change this name as long as it is unique (Host Name must be limited to
15 characters for LXI compliance) so that VXI-11 Discovery and any other
IP Discovery program can identify your specific device on your network.