AMETEK SFA Series Ethernet Programming - Manual (Page 23)

M550129-03 Rev K 3-1
SECTION 3
IEEE 488.2 GPIB/ RS232
CONFIGURATIONS
AND REMOTE PROGRAMMING
3.1 REAR PANEL
This section provides illustrations of the SG power supply’s rear panel
layout, which differs among the SG models. Figure 3-1, Figure 3-2 and
Figure 3-3 are examples. Regardless of the layout, the component
functions are common across all models, and those that are pertinent to
the RS232 and IEEE 488.2 GPIB options are described here.
Figure 3-1. SG Unit with GPIB/RS232 Option
1 – RS232 (RJ-type 6P6C) connector
2 – Configuration Switch (may be 8-pin or 4-pin) - for correct settings see
Section 3.3.1.
3 – IEEE 488.2 GPIB connector