AMETEK SFA Series Ethernet Programming - Manual (Page 56)

Ethernet Configuration and Remote Programming SG Series Programming
5-16 M550129-03 Rev K
5.5.1 HOME
This is the default, information-only page. It displays all of the current
information about the supply that you are connected to:
Figure 5-12. SGI Home Page
•
The Model number, the Manufacturer, and the Serial Number of
your Ethernet power supply
•
Firmware Revision: the version of the Ethernet firmware that is
currently installed.
•
VISA Resource identifies the specific resource name used to
communicate via VISA (Virtual Instrument Software Architecture)
•
LXI™ Compliance: the version and instrument class of the LXI™
standard with which your power supply is compliant
•
Host Name: either the default or user-defined, network-unique
identity (Must be limited to 15 characters or less for LXI
compliance).
•
Description: either the default or user-defined description of the
power supply in use (you can change the description to suit your
needs, in the
CONFIGURATION page, but it must be limited to 36
characters)
•
MAC Address: the power supply Ethernet’s unique hardware
address