AMETEK MX15 Series User Manual
Page 93
User Manual
– Rev M
California Instruments
MX15
93
ENTRY
DESCRIPTION
arbitrary waveform capability (-1Pi).
N/A
This feature is not available on
–1 models. N/A
is shown.
CLOCK/LOC
N/A
Clock and lock is an option. If no
–LKM option
is installed, this field will show N/A.
MAST
-LKM Option installed. The unit can be used
as a Clock and Lock system master or stand-
alone.
AUX
-LKS option installed. The unit can be used as
a Clock and Lock system auxiliary or stand-
alone.
MIL704
Avionics test - MIL-STD 704 revs D and E
Option (as interpreted by AMETEK at time of
release)
DO160
Avionics test
– RTCA DO160 Option
MS704
Avionics test - MIL-STD 704 revs A through F
Option (according to Appendix A released with
rev F)
ABD
Avionics test
– Airbus ABD0100.1.8 Option
LF
Low Frequency Option
– Frequency will be
limited to 500Hz
MB
Multi-Box Option
– Each MX15 in a multibox
configuration will have its own controller.
4.2.13 Elapsed Time and Temperature Screen
The Etime/Temp screen displays the elapsed time since the power source has first been turned
on. This is an accumulated total time in hours, minutes and seconds.
The same screen also displays the internal temperature of the power supply.
ENTRY
DESCRIPTION
ETIME
01:23:45
The ETIME field displays the total
accumulated elapsed time for the instrument
since it's initial manufacture. This value cannot