AMETEK MX15 Series - Manual (Page 80)

User Manual – Rev M California Instruments
MX15 80
ENTRY DESCRIPTION
ST PHASE Selects the start phase angle for output changes made to either
voltage or frequency. This allows changing the output at a specific
phase angle. The ON/OFF key also uses this phase angle setting to
program the output voltage up to the set level after the output relay is
closed. The default value for this field is RAND. To set the start
phase angle, set the cursor to the ST PHASE field and use either
shuttle knob or the keypad to adjust between ± 360°. To set to
RAND, use the BACK key.