AMETEK MX15 Series - Manual (Page 19)

User Manual – Rev M California Instruments
MX15 19
2.1.7 Unit Protection
Input Over current: In-line fast acting fuses. Check fuse rating in Service and Maintenance
section. Ratings will depend on AC input configuration settings.
Circuit breaker for LV supply.
Input Over voltage: Automatic shutdown.
Input Over voltage
Transients: Surge protection to withstand EN50082-1 (IEC 801-4, 5) levels.
Output Over current: Adjustable level constant current mode with programmable set point.
Output Short Circuit: Peak and RMS current limit.
Over temperature: Automatic shutdown.
2.2 Mechanical
Parameter Specification
Dimensions:
(for each MX chassis) Height: 31.75” 806 mm
Width: 24” 610 mm
Depth: 28” 711 mm
Unit Weight:
(for each MX chassis) Net: 600 lbs / 272 Kg approximately
Shipping: 681 lbs / 309 Kg approximately
Material: Steel chassis with aluminum panels and covers.
Finish: Light textured painted external surfaces.
Panels semi-gloss polyurethane color no. 26440 (medium gray)
Cooling: Fan cooled with air intake on the front and exhaust to the rear.
Fans:
2 x 225CFM.
Air displacement 7.5 Cu Ft/sec. Max.
Internal Construction: Modular sub assemblies.
Rear Panel
Connections:
(See section 3 for description of connections)

Cable entry and strain relieve for AC input wiring

Cable entry and strain relieve for output wiring

External sense terminal block (Remote voltage sense)

System interface (2x)

Clock and Lock BNC's (requires -LKM or -LKS options)

RS232, USB, GPIB, LAN (option)

Trigger In BNC

Trigger Out BNC

Function Strobe BNC

Output Status