AMETEK MX15 Series User Manual
Page 145
User Manual - Rev M
California Instruments
MX15
145
Standard/Group
RTCA
A(CF)
A(NF)
A(WF)
3
N/A
N/A
N/A
N/A
Frequency
380
390
360
360
Standard/Group
Group1
Group2
Group3
Voltage
1
104
104
104
3
N/A
N/A
N/A
Frequency
390
360
360
Table 9-1: Normal Voltage and Frequency minimum
Standard/Group
RTCA
A(CF)
A(NF)
A(WF)
Voltage
1
122
122
122
122
3
N/A
N/A
N/A
N/A
Frequency
420
410
650
800
Standard/Group
Group1
Group2
Group3
Voltage
1
122
122
122
3
N/A
N/A
N/A
Frequency
410
650
800
Table 9-2: Normal Voltage and Frequency Maximum
This test will set the voltage and frequency to levels defined by Table 9-1. The test will last for 30
minutes. The test will be repeated, except group1, using the Voltage setting from Table 9-2 and the
frequency from Table 9-1. The
key (backspace) will terminate the test at any time.
VOLT FREQ MAX
This test will set the voltage and frequency to levels defined by Table 9-2. The test will last for 30
minutes. The test will be repeated, except group1, using the Voltage setting from Table 9-1 and the
frequency from Table 9-2. The unselected phases will remain at 115 volts. The
key
(backspace) will terminate the test at any time.