AMETEK MX15 Series - Manual (Page 29)

User Manual – Rev M California Instruments
MX15 29
2.7 Supplemental Specifications
Supplemental specifications are not warranted and generally reflect typical performance
characteristics. These characteristics are have been checked on a type test basis only and are
not verified on each unit shipped. They are provided for reference only.
2.7.1 Output
Output Parameter MX15 MX30/2 MX45/3
Voltage:
Slew rate: > 0.5 V/micro sec
Stability: 0.25 % over 24 hour period at constant line, load and temperature.
Settling time: < 0.5 msec
Frequency:
Temperature
coefficient: 
5ppm per degree C
Stability: 
15 ppm per year
Current:
Constant Power
Mode: Operation at higher currents but constant power is possible from 80% of
Voltage range (125% of max. current) declining to 100% of maximum current
at 100 % of voltage range for short periods of time or at reduced ambient
temperatures. (< 15 mins @ 30° C). See Figure 2-2 and Figure 2-4.
2.7.2 Acoustic Noise Levels
Acoustic Noise: Measured at a distance of one meter. (3 ft.)
Front 53 dBA at no load to 65 dBA at full load.
Back 55 dBA at no load to 67 dBA at full load