AMETEK MX15 Series - Manual (Page 89)

User Manual – Rev M California Instruments
MX15 89
ENTRY DESCRIPTION
been cycled.
Port No TCP remote port number. This value must be
set to 5025 (SCPI) to support the built in web
page.
This value can be changed by pressing the
SET key and entering a new value from the
keypad. Any change to this value will NOT
take effect until after power on the unit has
been cycled.
LAN Default LAN default setting can be achieve by
selecting the Mac address screen and press
the set key followed by the Enter key. Press
the Enter key again to confirm. The IP address
is set to DHCP or AUTO IP.