AMETEK MX15 Series - Manual (Page 46)

User Manual – Rev M California Instruments
MX15 46
MX135 Output Wiring Diagram
Figure 3-9 shows the required output connections for an MX45/3-1Pi or MX45/3-1Pi-MB single-phase output configuration (rear-view
perspective). Always disconnect all input power from the MX45/3 before removing the rear panel cover that provides access to the input
and output terminal connections. Note that the master is shown in the center in this drawing. MX45/3 systems are shipped with external
output terminal blocks that enable the output wiring from two or three chassis to be combined, providing a single point of connection to the
EUT. These blocks are not enclosed however.
Figure 3-9: MX45/3 or MX45/3-MB Output Wiring (Rear view)