Keri Systems Doors NetXtreme - Manual (Page 65)

Figure 63:Create Dual Verification Property Set
Keri Systems, Inc. Doors NetXtreme TM Reference Manual
01945-100 Rev. 4.0 Page 63
21.2 Create Dual Verification Property Set
Click on Setup > System. Select the Properties tab and click on the Doors/Gates button. A new property
set will need to be created for Dual Verification.
1. Click on the Add New button.
2. Give the property set a name that will make it easy to identify. Using the phrase “dual verification”
in the set name is recommended.
3. Select the Door Type (standard or gate).
4. Select “YES” from the drop-down menu in the Dual Verification column. Go through the following
columns and set them as desired until reaching the “Dual Verification Required Timezone” column.
5. Dual Verification reader(s) may have separate timezones assigned (for example, if Dual
Verification is only to be used after business hours). In the “Dual Verification Required Timezone”
column, select from the drop-down menu the timezone to be used.
6. In the “Dual Verification Wait Time” column, select from the drop-down menu the length of time
the reader will wait for the secondary credential to be entered before timing out (the range available
is from 1-60 seconds). Continue through the remaining columns to assign the options as desired.
7. Click on the “Apply Changes” button.