Keri Systems Doors NetXtreme - Manual (Page 33)

Keri Systems, Inc. Doors NetXtreme TM Reference Manual
01945-100 Rev. 4.0 Page 31
9.2 Assign Property Sets to Controllers
Figure 28: Configure Controllers
Click on Setup > System > Configure Controllers.
9.2.1 Assign Doors/Gates Property Set
Click on Setup > System > Configure Controllers > Doors/Gates (tab).
1. Click on the to reveal all doors on the controller.
2. Use the drop-down menu to assign a Doors/Gates Property Set to each door.
3. Each individual aspect of the property set may be changed to match the specifically desired
configuration. Use the scroll-down buttons to select from available options.
4. Check the configuration for all aspects and make changes as appropriate.
5. Click on the “Apply Changes” button to save the configuration, or click on the “Undo Changes”
button to clear all changes made.
NOTE: The option to assign a different site will not appear until a new site has been created. See
“Create New Site” on page 30.