Keri Systems Doors NetXtreme - Manual (Page 45)

Keri Systems, Inc. Doors NetXtreme TM Reference Manual
01945-100 Rev. 4.0 Page 43
12.0 IN / OUT Reader
There are three type of In/Out Reader:
• In only
• Out only
• In/Out
Figure 40: Enable In/Out Reader
12.1 Enable In/Out Reader
Click on Setup > Options and Preferences.
1. Select the “Setup User Options” tab.
2. Click in the box next to “In/Out Doors Enabled.”
3. If an 8 Bit Burst keypad is in use, the number of PIN digits to be used may be set as well. (The
range available is from 1-15 digits.)
4. Click on the “Apply All Changes” button.