Keri Systems Doors NetXtreme - Manual (Page 48)

Figure 43: Create In/Out Reader Action Sequence
Doors NetXtreme TM Reference Manual Keri Systems, Inc.
Page 46 01945-100 Rev. 4.0
12.4 Create In/Out Reader Action Sequence
Click on Setup > System.
1. Click on the “Program System” tab.
2. Click on the “+” to expand the controller information.
3. Click on the “Add New Sequence” button.
4. Give the action sequence a name that will make it easy to identify. Using the direction of the reader
in the sequence name is recommended.
5. From the list of Trigger Sources (inputs) “drag and drop” the trigger source to the Trigger column
in the new sequence.
6. From the list of Action Sources (outputs) “drag and drop” the desired action to the Actions column
in the new sequence.
NOTE: Repeat steps 3-6 for every In/Out Reader door.
NOTE: For an example of how to “drag and drop” see Figure 33 on page 36.
7. Click on the “Apply Changes” button.