Keri Systems Doors NetXtreme - Manual (Page 14)

Doors NetXtreme TM Reference Manual Keri Systems, Inc.
Page 12 01945-100 Rev. 4.0
4.0 Operators
Figure 11: Setup Security Level
The operators are the people who will be performing the work – creating the databases required by the
DoorsNXT software to do its job and monitoring the system once everything has been downloaded to
the controllers.
Since the “Administrator” has access rights to every operation, anyone who knows the name and
password will have complete programming access. Keri Systems recommends keeping this
information a closely guarded secret.
4.1 Create a New Security Level
DoorsNXT comes with 2 pre-programmed security levels. A DoorsNXT Administrator has all access
rights to every operation. Care should be given before assigning Administrator rights to an operator.
1. In the Setup Operators and Security Levels window/Security Levels tab, click on .
2. Rename the Security Level Name (name is limited to 32 characters in length).
3. Use drop down menu next to “Access:” to choose between none, read only, and read/write for each
security right.
None
The operator does not have operation rights.
Read Only
The operator can view, but not make any changes to this operation.
Read/Write
The operator can view AND change the setup of that operation right.
4. Click on .