Keri Systems Doors NetXtreme - Manual (Page 50)

Figure 45: Update Window
Doors NetXtreme TM Reference Manual Keri Systems, Inc.
Page 48 01945-100 Rev. 4.0
13.0 Update the Network
The DoorsNXT software needs to download operating parameters to all controllers on the access control
network.
Click on the button.
1. To begin the update, use the drop-down menu to select which controllers should be updated.
NOTE: If a controller has not been assigned an IP address it will not show in the drop-down menu.
Also, if there is only one controller on the network you may only select the “all” option.
2. Select either the “Complete Update” or “Minimum Update” button.
NOTE: The “Minimum Update” command uploads from the server to the access control network only
the changes made to the DoorsNXT databases since the last update was performed. The “Complete
Update” command uploads from the server to the access control network ALL DoorsNXT database
information.
3. The status of the update will be shown in the window.