Keri Systems Doors NetXtreme - Manual (Page 46)

Figure 41: Create In/Out Reader Property Set
Doors NetXtreme TM Reference Manual Keri Systems, Inc.
Page 44 01945-100 Rev. 4.0
12.2 Create In/Out Reader Property Set
Click on Setup > System. Select the Properties tab and click on the Doors/Gates button. A new property
set will need to be created for In/Out Reader.
1. Click on the Add New button.
2. Give the property set a name that will make it easy to identify. Using the phrase “in/out reader” in
the set name is recommended.
3. Select the Door Type (standard or gate).
4. From the drop-down menu in the Direction column, select the direction for the reader.
5. Go through the remaining columns to assign the options as desired.
6. Click on the “Apply Changes” button.