beautypg.com

0 setup access group – Keri Systems Doors NetXtreme User Manual

Page 39

background image

Figure 34: Setup Access Groups

Keri Systems, Inc.

Doors NetXtreme

TM

Reference Manual

01945-100 Rev. 4.0

Page 37

10.0

Setup Access Group

Setup > Access Groups.

NOTE: If a user has multiple access groups assigned. The one granting the least restrictive access
will be used.

1. Verify the “Show All” option is selected.
2. Click on the “Add Access Group” button or “Duplicate Access Group” button.
3. Name the Access Group something that will be easily recognizable throughout the system and in

reports.

4. Select the doors that are to be included in the access group.
5. From the drop-down menu, select the timezone to be applied to each door.
6. From the drop-down menu, select any action sequences that should be applied to the particular door

(action sequences must be created in “Create New Trigger (I/O) Action Sequence” on page 35,
before they will appear in the drop-down menu).

7. Apply Changes or Undo Changes.